Galant LS V6-3.0L SOHC (1999)
Impact Sensor: Testing and Inspection
A side impact sensor is installed behind the center pillar trim on both driver and passenger sides of the vehicle.
WARNING:
1. Never attempt to disassemble or repair the side impact sensor. If faulty, replace it.
2. Do not drop or subject the side impact sensor to impact or vibration. Replace the side impact sensor, if denting, cracking, deformation,
or rust are present. Discard the old one.
3. Replace the side impact sensor after the air bag has deployed.
WARNING: If a dent, crack, deformation or rust is detected, replace with a new sensor.
NOTE: For checking of the side impact sensor other than described above, refer to the system concerning SRS diagnosis
-
Check the side impact sensor and bracket for dents, cracks or deformation
-
Check the connector for damage, and terminal for deformation.
-
Check that there is no bending or corrosion in the center pillar.
