Galant LS V6-3.0L SOHC (1999)
9.
Install the harness attachment clips and the red 2-pin connector into their mounting holes in the seat frame.
a.
On Eclipse and Eclipse Spyder front passenger seats, use a new tie-wrap to secure the harness to the seat frame bar. This will prevent
harness interference with the seat spring.
10.
Reinstall the seatback panel.
11.
Reinstall the seat as described in the service manual. Reconnect the SRS connector. If equipped with power seat, reconnect the power seat
connector.
12.
Use the MUT-II scan tool to erase the Side Air Bag Open Circuit DTC from the PCM memory.
PARTS INFORMATION
