Galant LS V6-3.0L SOHC (1999)
Evaporative Emission Control System Pressure Sensor: Testing and Inspection
EVAPORATIVE EMISSION VENTILATION SOLENOID CHECK
1. Connect a hand vacuum pump to nipple (A) of the solenoid.
2. Check air tightness by applying a vacuum with voltage applied directly from the battery to the evaporative emission ventilation solenoid and
without applying voltage.
3. Measure the resistance between the terminals of the solenoid.
Standard value: 17 - 21 Ohms [at 20 °C (68 °F)]
4. Replace the solenoid if the resistance is out of specification.
