Galant LS V6-3.0L SOHC (1999)
Ignition Switch And Immobilizer System - Removal And Installation
<A> STEERING LOCK CYLINDER REMOVAL
1. Insert the key in the steering lock cylinder and turn it to the "ACC" Position.
2. Using a small Phillips head screwdriver, pull the steering lock cylinder toward you.
INSTALLATION SERVICE POINT
>A< IMMOBILIZER-ECU INSTALLATION
If the immobilizer-ECU is replaced, peel off the immobilizer serial number sticker from shown position. Then attach a new immobilizer-ECU
identification sticker.