Galant LS V6-3.0L SOHC (1999)
Steering Wheel: Service and Repair
WARNING:
-
Never attempt to disassemble or repair the air bag modules or clock spring. If faulty, replace it.
-
Do not drop the air bag modules or clock spring or allow contact with water, grease or oil Replace it if a dent', crack, deformation or rust is
detected.
-
The air bag modules should be stored on a flat surface and placed so that the pad surface is facing upward. Do not place anything on top of it.
-
Do not expose the air bag modules to temperatures over 93 °C (200 °F).
-
After deployment of an air bag, replace the clock spring with a new one.
-
Wear gloves and safety glasses when handling air bags that have already deployed.
-
An undeployed air bag module should only be disposed of in accordance with the procedures.
Pre-Removal Operation
After setting the steering wheel and the front wheels to the straight ahead position, remove the ignition key.
REMOVAL
1. Negative (-) Battery Cable Disconnection
DANGER: Wait at least 60 seconds after disconnecting the battery cable before doing any further work.
