Galant LS V6-3.0L SOHC (1999)
2. Using a rod as shown, line up the holes in the strut assembly spring lower seat with the hole in the spring upper seat.
3. Align both ends of the coil spring with the grooves in spring seat, and then loosen special tools MB991237 and M13991238.
<Up to Sep. 1998>
CAUTION: Do not use an impact wrench to tighten the jam nut, otherwise the jam nut will not be tightened securely.
4. Using the special tools MB991681 and M13991682, tighten the jam nut to 56 - 69 Nm (44 - 51 ft. lbs.).
<From Oct. 1998>
CAUTION: Do not use an impact wrench to tighten the jam nut, otherwise the jam nut will not be tightened securely.
4. Using special tool M13991176, tighten the jam nut to 59 - 69 Nm (44 - 51 ft. lbs.).
INSPECTION
-
Check the bearing for wear or rust.
-
Check the rubber parts for damage or deterioration.
-
Check the spring for deformation, deterioration or damage.
-
Check the shock absorber for deformation.
