Galant LS V6-3.0L SOHC (1999)
Transmission Mount: Service and Repair
REMOVAL AND INSTALLATION
CAUTION: Mounting locations marked by * should be provisionally tightened, and then fully tightened after placing the vehicle horizontally and
loading the full weight of the engine on the vehicle body.
REMOVAL SERVICE POINT
<A> TRANSMISSION MOUNT BRACKET REMOVAL
1. Install the special tool MB991453 and MZ203827 to the vehicle body to support the engine and transmission assembly.
2. Remove the centermember and rear roll stopper bracket.
3. Remove the bolt and nut of the transmission mount bracket.
4. After lowering the engine and transmission assembly, remove the transmission mount bracket.
INSTALLATION SERVICE POINT
>A< TRANSMISSION MOUNT STOPPER INSTALLATION
