mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Relays and Modules - Windows and Glass > < Heated Glass Element Relay|Testing and Inspection
Page 1
background image

Heated Glass Element Switch: Testing and Inspection

Check continuity while battery voltage is applied between terminals 3 and 10.

NOTE:  After the defogger switch is turned on, there should be continuity between terminals 3 and 12 for approximately 9 to 13 minutes. Then the
defogger switch should be turned off.

Relays and Modules - Windows and Glass > < Heated Glass Element Relay|Testing and Inspection