Lancer L4-2.0L (4B11) (2008)
/Page-1479003.png)
OK: Normal condition is displayed.
Q: Is the check result normal?
YES : Replace the radio and CD player or CD changer.
NO : Go to Step 2.
STEP 2. Check the remote controlled radio switch.
Remove the remote controlled radio switch. Then check continuity between the switch terminals.
Q: Is the remote controlled radio switch in good condition?
YES : Go to Step 3.
NO : Replace the remote controlled radio switch.
STEP 3. Check clock spring connector C-204 and C-205 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Are clock spring connector C-204 and C-205 in good condition?
YES : Go to Step 4.
NO : Repair or replace the damaged component(s). Refer to general (electrical), Harness Connector Inspection. The steering remote control switch
should work normally.
STEP 4. Check the clock spring.
Check whether the clock spring is in good condition (Refer to SRS Air bag module and clock spring).
Q: Is the check result normal?
YES : Go to Step 5.
NO : Replace the clock spring.
STEP 5. Check radio and CD player or CD changer connector C-104 for loose, corroded or damaged terminals, or terminals pushed back in
the connector.
Q: Is radio and CD player or CD changer connector C-104 in good condition?
YES : Go to Step 6.
NO : Repair or replace the damaged component(s). Refer to general (electrical), Harness Connector Inspection. The steering remote control switch
should work normally.
STEP 6. Check the wiring harness between radio and CD player or CD changer connector C-104 (terminal 22, 32) and clock spring connector
C-205 (terminal 2, 3).
