Lancer L4-2.0L (4B11) (2008)
Spoiler: Service and Repair
REAR SPOILER
REMOVAL AND INSTALLATION
Removal Steps 1 - 3
INSTALLATION SERVICE POINT
]]A[[ TAPE INSTALLATION
1. Installation position
CAUTION:
-
The ambient temperature should be 15 (59) to 40° C(104° F). Ensure that the working area is clean.
-
If ambient temperature is less than 15° C (59° F), heat the tape and application surface to a temperature of 15 (59)to 40° C(104° F).
-
Be careful that air bubbles are not formed under the tape.
2. Installation procedure
1. Wipe the tape application surface and clean it with a rag moistened with isopropyl alcohol.
2. Remove backing paper from the tape, and apply it to the rear spoiler assembly.