Lancer L4-2.0L (4B11) (2008)
/Page-467001.png)
Radiator Cap: Testing and Inspection
RADIATOR CAP OPENING PRESSURE CHECK
NOTE: Be sure that the cap is clean before testing. Rust or other foreign material on the cap seal will cause an improper reading.
1. Use a cap adapter to attach the cap to the tester.
2. Increase the pressure until the indicator of the gauge stops moving.
Minimum limit: 83 kPa (12 psi)
Standard value: 93 - 123 kPa (14 - 18 psi)
3. Replace the radiator cap if the reading does not remain at or above the limit.
