Lancer L4-2.0L (4B11) (2008)
CAUTION: Do not over-tighten. As the self-forming-type screw is used, the excessive torque can damage the intake manifold threads.
>>B<< MANIFOLD ABSOLUTE PRESSURE SENSOR INSTALLATION
CAUTION:
-
Install the manifold absolute pressure sensor, taking care that no shock is applied to it.
-
Do not use a manifold absolute pressure sensor that has been dropped.
>>C<< INTAKE MANIFOLD/INJECTOR PROTECTOR FRONT INSTALLATION
Install the intake manifold and the injector protector front, and tighten mounting bolts and nuts temporarily.
NOTE: The tightening of the fuel rail assembly, the intake manifold and the injector protector front has the specified order. Temporarily tighten the
intake manifold and injector protector front mounting bolts and nuts (Refer to MFI - Injector).