Lancer L4-2.0L (4B11) (2008)
Loosen the mounting bolts of the camshaft bearing caps in the order of number shown in the figure in four or five steps, and remove the camshaft
bearing caps.
[[C]] VALVE TAPPET REMOVAL
CAUTION
^
Do not use pliers or other tools to remove the valve tappets. Always remove them by hand.
^
When reusing the removed valve tappet, it has to be installed in the same position as before. Be sure to put a tab that shows the original
installation position on the valve tappet when storing it.
Remove all of the valve tappets by hand.
[[D]] VALVE SPRING RETAINER LOCK REMOVAL