Lancer L4-2.0L (4B11) (2008)
Oil Pressure Switch (For Fuel Pump): Service and Repair
REMOVAL AND INSTALLATION
Pre-removal & Post-installation Operation
Removal Steps 1-2
Required Special Tool:
^
MB992118: Oil Pressure Switch Wrench
REMOVAL SERVICE POINT
[[A]] THROTTLE BODY MOUNTING BOLTS REMOVAL
Remove the throttle body mounting bolts and put the throttle body aside so as not to interfere the oil pressure switch connector disconnection.
[[B]] OIL PRESSURE SWITCH REMOVAL
CAUTION
The sealant is applied to the bolt. Remove the bolt with care not to break it.