Lancer L4-2.0L (4B11) (2008)
Q: Is the wiring harness between rear combination light connector and ETACS-ECU connector in good condition?
YES : Go to Step 6.
NO : The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary.
STEP 6. Retest the system. Check that the taillight illuminates normally.
Q: Does the taillight work normally?
YES : The trouble can be an intermittent malfunction (Refer to general (Body and Chassis) How to use Troubleshooting/inspection Service Points,
How to Cope with Intermittent Malfunction).
NO : Replace the rear combination light unit.