Lancer L4-2.0L (4B11) (2008)
To Reset
The "_ _ _" display can be reset while the ignition switch is in the "OFF" position. When the display is reset, the time until the next periodic
inspection is displayed and "PERIODIC INSPECTION" is no longer displayed when the ignition switch is switched from the "OFF" position to
the "ON" position.
1. When you lightly press the multi-information meter switch. The information screen changes to the service reminder display screen.
2. Press and hold the multi-information meter switch (for about 2 seconds or more) to display "tool icon" and make it flash. (If there is no operation
for about 10 seconds with this indicator flashing, the display returns to the previous screen.)
3. With this indicator flashing, if you lightly press the multi-information meter switch, the screen switches from "_ _ _" to "CLEAR". After that, the
time until the next periodic inspection is shown.