Lancer L4-2.0L (4B11) (2008)
Throttle Body: Removal and Replacement
THROTTLE BODY ASSEMBLY
REMOVAL AND INSTALLATION
CAUTION:
-
When the throttle body assembly is replaced, initialize the learned value using scan tool (Refer to General (Body and Chassis) -
Precautions before Service, and Initialization Procedure of MFI Engine Learned Value).
-
Never loosen the screw fixing the throttle body assembly resin cover. If the screw is loosened, the sensor incorporated in the resin cover is
misaligned and the throttle body assembly does not work normally.
Pre-Removal And Post-Installation Operation
Removal Steps 1-9
INSTALLATION SERVICE POINTS
>>A<< THROTTLE BODY GASKET INSTALLATION