Lancer L4-2.0L (4B11) (2008)
Click on the check mark to continue.
NOTE:
If this screen does not appear, continue with
step k.
If the PCM is already reprogrammed for this concern, this screen will display. If this message displays, do not continue with this reprogramming
procedure.
Click the check mark to clear the window, then click on the Home icon at the lower left corner of the screen to return to the System Select main page.
k.
The CAN database screen will display.
Confirm the database number at the top right of the
table is N07091 or higher.
(If more than one row is displayed in the table, select the appropriate PCM part number.)
Click on the check mark to continue.