Lancer L4-2.0L (4B11) (2008)
/Page-920006.png)
e.
Click on the car icon at the bottom of the page.
f.
Click on the Eraser Icon at the bottom of the page.
Select VIN by clicking on the VIN button.
g.
Click on the icon in the lower RH corner of the screen to have the MUT-III automatically read the VIN. If a message appears saying that the
VIN cannot be input automatically, manually type the 17 digit VIN into the VIN field.
Make sure the VIN is correct and click on the check mark.
