Lancer L4-2.0L (4B11) (2008)
j.
A message will advise you that the system will "Automatic search the data."
Click on the check mark to continue.
NOTE:
If this screen does not appear, continue with step k.
If the PCM is already reprogrammed for this concern, this screen will display. If this message displays, do not continue with this
reprogramming procedure.
Click the check mark to clear the window, then click on the Home icon at the lower left corner of the screen to return to the System Select
main page.
k.
The CAN database screen will display. <
Confirm the database number at the top right of the table is N08091 or higher. <
If more than one row is displayed in the table, select the appropriate ECM part number. <