Lancer L4-2.0L (4B11) (2008)
2.
Verify that the MEDIC II is at version 4.0A and at
download M167 or higher.
If your MEDIC II Down-load is below M167, update
your MEDIC II as follows.
3.
On the MEDIC-II main screen, click on
"Maintenance."
4.
Click on "Download". After the download completes, click on "Cancel" to exit the "Maintenance" window.
GO TO THE REPROGRAMMING PROCEDURE.
5.
Scan Tool Viewer (STV) ONLY (MEDIC-II USERS go to the Programming Procedure).
Verify that your MUT-III has the most current version of the reprogramming database:
a.
Select "Special Function", then select "ECU Reprogramming."
b.
Select "Database File Display." The database version is displayed in the top right corner of the screen. Make sure the database version is