Lancer L4-2.0L (4B11) (2008)
/Page-83007.png)
OK: Normal condition is displayed.
Q: Is the check result normal?
YES : Replace the audio visual navigation unit.
NO : Go to Step 2.
STEP 2. Check the remote controlled radio switch.
Remove the remote controlled radio switch. Then check continuity between the switch terminals.
Q: Is the remote controlled radio switch in good condition?
YES : Go to Step 3.
NO : Replace the remote controlled radio switch.
STEP 3. Check clock spring connector C-204 and C-205 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Are clock spring connector C-204 and C-205 in good condition?
YES : Go to Step 4.
NO : Repair or replace the damaged component (Refer to general (electrical), Harness Connector Inspection). The steering remote control switch
should work normally.
