Lancer L4-2.0L (4B11) (2008)
Use special tool oil pressure switch wrench (MB992118) to remove the oil pressure switch.
INSTALLATION SERVICE POINT
]]A[[ OIL PRESSURE SWITCH INSTALLATION
1. Apply sealant to the oil pressure switch thread.
Specified sealant: Three bond 1141 E or equivalent
CAUTION
Do not start the engine for 1 hour or more after the oil pressure switch installation.
2. In the same manner as removal, use special tool oil pressure switch wrench (MD992118) to tighten the oil pressure switch to the specified torque.
Tightening torque: 10 ± 2 Nm (87 ± 17 in-lb)