Lancer L4-2.0L (4B11) (2008)
Ignition Switch: Symptom Related Diagnostic Procedures
Trouble Symptom Chart
Symptom Procedures
Ignition key cylinder illumination light does not illuminate/extinguish normally. <vehicles with WCM>
CAUTION: Whenever the ECU is replaced, ensure that the input and output signal circuits are normal.
Ignition Key Cylinder Illumination Light Circuit <Vehicles With WCM>
OPERATION
The ETACS-ECU operates this function in accordance with the input signals below.
-
Ignition switch (IG1)
-
Key reminder switch
-
Driver's door switch
-
Driver's door lock actuator