Lancer L4-2.0L (4B11) (2008)
^
The magnetic encoder for wheel speed sensor is installed in the wheel bearing. Install the wheel bearing so that the encoder is positioned in the
direction shown in the figure.
^
When press-fit the wheel bearing, push the outer race.
Use special tools MB990890 and MD999528 to press-fit the wheel bearing.
]]B[[ DUST SHIELD INSTALLATION
Use special tools MB991388 and MB991576 to press-fit the knuckle into the dust shield.
NOTE: Use the bolts (M12) to align the caliper mounting holes.
]]C[[ HUB ROTATION STARTING TORQUE CHECK