mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

ABOUT US
M/T - Clutch Cover Bolt Torque Revision|Page 3764 > < M/T - Clutch Cover Bolt Torque Revision|Page 3762

Lancer L4-2.0L (4B11) (2008)

Page 2
background image

1. Check the O-ring for damage and deformation. If the O-ring is damage or deformed, replace the concentric slave cylinder adapter.
2. Check the surface that touches the concentric slave cylinder for contamination. If contaminated, clean the surface the specified clutch fluid.

Specified fluid: Brake Fluid DOT 3 or DOT 4

3. Make sure there are no deformed and/or missing clips.

M/T - Clutch Cover Bolt Torque Revision|Page 3764 > < M/T - Clutch Cover Bolt Torque Revision|Page 3762