Lancer L4-2.0L SOHC (2004)
1. Operate the MUT-II as follows:
1. Select "SYSTEM SELECT."
2. Select "SWS."
3. Select "SWS MONITOR."
4. Select "DATA LIST."
5. Select "ETACS ECU."
2. Check that normal conditions are displayed on the items described in the table.
Q: Is normal condition displayed?
YES: Go to Step 3.
NO: Refer to Inspection Procedure N-2 "ETACS-ECU does not receive a signal from the ignition switch (IG1)."