Lancer L4-2.0L SOHC (2004)
2. Follow the table to check the door lock actuator (front: RH) for correct operation.
Q: Is the door lock actuator (front: RH) normal?
YES: Go to Step 8.
NO: Replace the door lock actuator (front: RH). Verify that all the doors can be locked and unlocked normally.
STEP 8. Check ETACS-ECU connector C-226 connector E-15 for loose, corroded or damaged terminals, or terminals pushed back in the
connector.
Q: Is ETACS-ECU connector C-226 in good condition?
YES: Go to Step 9.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that all the doors can be locked and unlocked
normally.
