Lancer L4-2.4L (4B12) (2009)
Prepare a tool as shown to remove the door outside handle base.
INSTALLATION SERVICE POINTS
]]A[[ DOOR CHECK INSTALLATION
Install the door check with the following identification marks facing upward.
]]B[[ DOOR OUTSIDE HANDLE BASE INSTALLATION
Prepare the tool as shown, and tighten it to the specified torque.
Tightening torque: 4.0 ± 2.0 N.m (35 ± 17 in-lb)
]]C[[ DOOR INSIDE HANDLE INSTALLATION
When connecting the inside cable to the door inside handle, ensure that the door latch and the inside handle are locked.