Lancer L4-2.4L (4B12) (2009)
Removal Steps 1-9 (Part 2)
REMOVAL SERVICE POINTS
[[A]] DOOR BELTLINE MOLDING [FRONT DOOR] REMOVAL
Pry the door beltline molding clip positions with the flat-tipped screwdriver and remove the door beltline molding.
[[B]] DOOR BELTLINE MOLDING [REAR DOOR] REMOVAL
1. Prise the clip of the door beltline molding using a flat-tipped screwdriver in the order of the numbers (from 1 to 4) shown in the figure. Lift the
vehicle front side of the door beltline molding.
NOTE: The flat-tipped screwdriver cannot be used at clips 5 and 6 of the door beltline molding shown in the figure.