Lancer L4-2.4L (4B12) (2009)
INSTALLATION SERVICE POINT
]]A[[ BRAKE TUBE CONNECTION
Install the brake pipe to the hydraulic unit as shown in the figure.
1. From master cylinder (primary) [Marking color: Blue]
2. To front brake (RH) [Marking color: Orange]
3. To front brake (LH) [Marking color: Red]
4. From master cylinder (secondary) [Marking color: Yellow]
5. To rear brake (RH) [Marking color: Pink]
6. To rear brake (LH) [Marking color: White]