Lancer L4-2.4L (4B12) (2009)
1. Remove the A/C compressor and clutch assembly together with the hose from the bracket.
2. Tie the removed A/C compressor and clutch assembly with a string at a position where they will not interfere with the removal and installation of
engine oil pan.
[[B]] ENGINE OIL PAN REMOVAL
1. Remove the engine oil pan mounting bolts.
CAUTION
Do not forcibly drive in special tool MD998727 to avoid damage to the engine oil pan seal surface of cylinder block assembly.
2. Insert special tool MD998727 from the engine oil pan removal groove of the cylinder block assembly.
3. Lightly tap the special tool MD998727 with a hammer to slide the engine oil pan seal surface, cut off the liquid gasket, and remove the engine oil
pan.
INSTALLATION SERVICE POINTS
]]A[[ ENGINE OIL PAN INSTALLATION
1. Remove all the traces of sealant adhering to the engine oil pan and cylinder block assembly using a remover or others. Then, degrease them using
white gasoline or the like.