Lancer L4-2.4L (4B12) (2009)
Make mating marks on the radiator hose and the hose clamp. Disconnect the radiator hose.
[[B]] FUEL HIGH-PRESSURE HOSE REMOVAL
1. Remove the stopper of the fuel high-pressure hose.
2. Raise the retainer of the fuel high-pressure hose and pull out the fuel high-pressure hose in the direction shown in the figure.
NOTE: If the retainer is released, install it securely after removing the fuel high-pressure hose.
[[C]] FRONT CAMSHAFT BEARING CAP REMOVAL
1. Temporarily install the engine oil pan which was removed at the timing chain removal.
CAUTION
When supporting the engine and transaxle assembly with a garage jack, be careful not to deform the engine oil pan.
2. Place a garage jack against the engine oil pan with a piece of wood in between to support the engine and transaxle assembly.