Lancer L4-2.4L (4B12) (2009)
Removal Steps 13-19
Required Special Tools:
^
MD998772: Valve Spring Compressor
^
MB992089: Retainer Holder C
^
MB992090: Retainer Holder Attachment
^
MB992085: Valve Stem Seal Pliers
^
MD998737: Valve Stem Seal Installer
REMOVAL SERVICE POINTS
[[A]] FRONT CAMSHAFT BEARING CAP REMOVAL
CAUTION
Be careful not to drop the camshaft bearing.
Loosen the front camshaft bearing cap mounting bolts in the order of number shown in the figure, and remove the front camshaft bearing cap.
[[B]] OIL FEEDING CAMSHAFT BEARING CAP/CAMSHAFT BEARING CAP/THRUST CAMSHAFT BEARING CAP REMOVAL
CAUTION
When the camshaft bearing cap mounting bolts are loosened at once, the mounting bolts jump out by the spring force and the threads are
damaged. Always loosen the mounting bolts in four or five steps.