Lancer L4-2.4L (4B12) (2009)
Fog/Driving Lamp Bulb: Service and Repair
BULB REPLACEMENT
CAUTION: Don't touch the bulb surface with bare hands or dirty gloves. If the bulb surface (glass part) gets dirty, clean it with alcohol or
thinner immediately and dry well, and then install it.
1. Remove the front fog light bezel and the front fog light assembly.
2. Disconnect the connector and withdraw the bulb.
3. After replacing the bulb, securely connect the connector, and install the front fog light assembly and the front fog light bezel.