Lancer L4-2.4L (4B12) (2009)
Removal Steps 1-9 (Part 2)
Required Special Tools:
-
MB990784: Ornament Remover
-
MB990803: Steering Wheel Puller
-
MB991958 Scan Tool (M.U.T.-III Sub Assembly)
-
MB991824:Vehicle Communication Interface( V.C.I.)
-
MB991827:M.U.T.-III USB Cable
-
MB991910:M.U.T.-III Main Harness A
-
MB992006: Extra Fine Probe
REMOVAL SERVICE POINTS
[A] NEGATIVE (-) BATTERY CABLE DISCONNECTION
DANGER: Wait at least 60 seconds after disconnecting the battery cable before doing any further work.
WARNING: Battery posts, terminals and related accessories contain lead and lead compounds. WASH HANDS AFTER HANDLING.
Disconnect the negative (-) battery cable from the battery and tape the terminal to prevent accidental connection and air bag(s) deployment.
[B] COVER REMOVAL
Insert Special tool MB990784 into the notch shown in the figure, and remove the cover.
[C] DRIVER'S AIR BAG MODULE CONNECTOR REMOVAL