Lancer L4-2.4L (4B12) (2009)
Ignition Switch Power Supply Circuit
TECHNICAL DESCRIPTION (COMMENT)
When the power supply system of ignition switch has a problem, none of the equipment and system connected to the ignition switch works even if the
ignition switch is operated.
TROUBLESHOOTING HINTS
-
The ignition switch may be defective
-
The fuse No.14 may be defective
-
The ETACS-ECU may be defective
-
The wiring harness or connectors may have loose, corroded, or damaged terminals, or terminals pushed back in the connector
DIAGNOSIS
Required Special Tools:
-
MB992006: Extra fine probe
-
MB991223: Harness set
STEP 1. Check ignition switch connector C-212 for loose, corroded or damaged terminals, or terminals pushed back in the connector.