Lancer L4-2.4L (4B12) (2009)
4. Set the closed wrench to the hexagonal area of the special tool MB992226.
5. Insert the hexagonal bit socket having width across flats of 10 mm (0.4 inch) into the hexagonal area of the rotor shaft.
6. Hold the pulley with the closed wrench.
Rotate the hexagonal bit socket counterclockwise to tighten it to the specified torque.
Specified torque: 73 ± 12 N.m (54 ± 8 ft-lb)
Inspection
INSPECTION [2.0L ENGINE NON-TURBO, 2.4L ENGINE]
PULLEY
Lock the pulley when rotating it clockwise. Check that the pulley rotates smoothly when rotating it counterclockwise.
CAUTION: Locking the one-way clutch might cause the damaged drive belt and an abnormal noise.
ROTOR