Lancer L4-2.4L (4B12) (2009)
Ignition Switch: Component Tests and General Diagnostics
Ignition Switch Continuity Check
INSPECTION
IGNITION SWITCH CONTINUITY CHECK
With the ignition switch mounted to the vehicle, disconnect and check the ignition switch connection connector.
Check of Ignition Key Reminder Warning Function (Steering Lock Reminder Tone Alarm By KOS)
CHECK OF IGNITION KEY REMINDER WARNING FUNCTION (STEERING LOCK REMINDER TONE ALARM BY KOS)
1. Driver's door: Release the closed and steering wheel lock, or turn the ignition key [vehicles with WCM] or emergency key [vehicles with KOS] to
the "LOCK" (OFF) position (key inserted).
2. Change the driver's door state from closed to open.
3. Check that the tone alarm sounds normally.
4. If a malfunction is found, carry out the troubleshooting. See: Instrument Panel, Gauges and Warning Indicators/Instrument Cluster /
Carrier/Testing and Inspection/Symptom Related Diagnostic Procedures/Trouble Symptom Chart