Lancer L4-2.4L (4B12) (2009)
/Page-1172007.png)
Remove the remote controlled radio switch. Then check continuity between the switch terminals.
Q: Is the remote controlled radio switch in good condition?
YES : Go to Step 2.
NO : Replace the remote controlled radio switch.
STEP 2. Check clock spring connector C-204 and C-205 for loose, corroded or damaged terminals, or terminals pushed back in the connector.
Q: Are clock spring connector C-204 and C-205 in good condition?
YES : Go to Step 3.
NO : Repair or replace the damaged component. The steering remote control switch should work normally.
STEP 3. Check the clock spring.
Check whether the clock spring is in good condition (Refer to Driver's Air Bag Module and Clock Spring [Except RALLIART] See: Restraint
Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Inspection or [RALLIART]). See: Restraint Systems/Air Bag
Systems/Clockspring Assembly / Spiral Cable/Service and Repair/Inspection
Q: Is the check result normal?
YES : Go to Step 4.
NO : Replace the clock spring.
