Lancer L4-2.4L (4B12) (2009)
/Page-1184001.png)
Control Arm Bushing: Service and Repair
Rear Suspension
LOWER ARM BUSHING REPLACEMENT
Required Special Tools:
^
MB992123: Arm Bushing Remover and Installer
^
MB991448: Bushing Remover and Installer Base
^
MB991449: Bushing Remover and Installer Supporter
CAUTION:
As the bushing has different outer diameters at both ends, be careful not to confuse the removal direction with the press-fit direction.
Use the special tools MB992123, MB991448 and MB991449 to remove and press-fit the lower arm bushing.
