Lancer L4-2.4L (4B12) (2009)
Wheel Bearing: Service and Repair
FRONT AXLE HUB ASSEMBLY
DISASSEMBLY AND ASSEMBLY
Disassembly Steps 1-5, Assembly Steps 1-5
Required Special Tools:
^
MB990326: Preload Socket
^
MB990685: Torque Wrench
^
MB990890: Rear Suspension Bushing Base
^
MB990935: Installer Adapter
^
MB990938: Installer Bar
^
MB991000: Spacer
^
MB991017: Front Hub Remover and Installer
^
MB991355: Knuckle Arm Bridge
^
MB991388: Bush Remover Base
^
MB991576: Base
^
MB992150: Oil Seal Installer
^
MB992250: Knuckle Arm Bridge Attachment
^
MD999528: Adapter
^
MD998801: Remover
^
MD998812: Installer Cap
^
MD998813: Installer
DISASSEMBLY SERVICE POINTS
[[A]] HUB REMOVAL
CAUTION:
In the hub removal operation, make sure to replace the wheel bearing with new one.