Lancer L4-2.4L (4B12) (2009)
Leave the ignition switch in the LOCK (OFF) position until the key interlock cable installation is completed.
1. Move the shift lever to the P position, and turn the ignition switch to the LOCK (OFF) position.
2. Install the tip of key interlock cable to the lock cam of shift lever assembly, using a caution not to twist the inner cable.
3. Install the adjuster case with its lock guide pulled up (unlocked).
4. Firmly push down the lock guide to lock it.
NOTE: The lock position of the key interlock cable is automatically adjusted by a spring.