Lancer L4-2.4L (4B12) (2009)
/Page-915002.png)
When removing the gearshift cable, be careful not to deform it because the clip is opened forcibly.
[[B]] SELECT CABLE DISCONNECTION (TRANSMISSION SIDE)/GEARSHIFT CABLE DISCONNECTION (TRANSAXLE
SIDE)/GEARSHIFT LINK CLIP REMOVAL
CAUTION:
Be careful not to pull out the cable directly to disconnect the joint because the cable could be broken.
1. Use the clip remover (special tool: MB992277), and disconnect the joint.
2. Push up the claws of the gearshift link clip using a screwdriver, etc., and then remove the gearshift link clip from the bracket together with the
cables.
INSTALLATION SERVICE POINTS
]]A[[ GEARSHIFT CABLE AND SELECT CABLE ASSEMBLY/GEARSHIFT CABLE CONNECTION (TRANSAXLE SIDE)/SELECT
CABLE CONNECTION (TRANSAXLE SIDE)/GEARSHIFT LINK CLIP INSTALLATION
CAUTION:
