mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 1782 > < Initial Inspection and Diagnostic Overview|Page 1780
Page 108
background image

2. Check continuity when the power window sub-switch (rear: LH) is operated to "UP" or "DOWN" position.

Q: Is the power window sub-switch (rear: LH) normal?

YES: Go to Step 16.

NO: Replace the power window sub-switch (rear: LH). When the power window sub-switch (rear: LH) is operated, the rear power window (LH)
should open or close normally.

STEP 16. Check the power window motor (rear: LH).

1. Remove the rear power regulator assembly (LH). Refer to Door-Door Glass and Regulator.

2. Connect a battery to the motor terminal, and check that the motor runs freely.

Q: Is the power window motor (rear: LH) normal?

YES: Go to Step 17.

NO: Replace the rear power regulator assembly (LH). When the power window sub-switch (rear: LH) is operated, the rear power window (LH)
should open or close normally.

Part 2 of 2

STEP 17. Check the battery power supply circuit to the power window sub-switch (rear: LH). Measure the voltage at power window
sub-switch (rear: LH) connector E-08
.

Initial Inspection and Diagnostic Overview|Page 1782 > < Initial Inspection and Diagnostic Overview|Page 1780