Lancer L4-2.4L SOHC (2005)
Q: Is the wiring harness from ETACS-ECU connectors C-226 (terminal 12), C-227 (terminal 22) and door lock actuator (front: LH) connector E-04
(terminal 6 and 4) in good condition?
YES: Replace the ETACS-ECU. Verify that all the doors can be locked and unlocked normally.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that all the doors can be locked and unlocked normally.
STEP 6. Check door lock actuator (front: RH) connector E-15 for loose, corroded or damaged terminals, or terminals pushed back in the
connector.
Q: Is door lock actuator (front: RH) connector E-15 in good condition?
YES: Go to Step 7.
NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. Verify that all the doors can be locked and unlocked
normally.
STEP 7. Check the door lock actuator (front: RH).
1. Remove the door lock actuator (front: RH), and check it. Refer to Door Handle and Latch.
