Lancer L4-2.4L SOHC (2005)
Shift Interlock: Initial Inspection and Diagnostic Overview
Introduction
INTRODUCTION TO A/T KEY INTERLOCK AND SHIFT MECHANISMS
If the key interlock and shift lock mechanisms indicates a malfunction, the key interlock cable, the shift lock cable, or the selector lever assembly may
be defective In this case follow troubleshooting below
Troubleshooting Strategy
A/T KEY INTERLOCK AND SHIFT LOCK MECHANISMS DIAGNOSTIC TROUBLESHOOTING STRATEGY
Use these steps to plan your diagnostic strategy. If your follow then carefully, you will be sure that you have exhausted most of the possible ways to
find automatic transaxle key interlock and shift lock mechanisms fault.
1. Gather information from the customer.
2. Verify that the condition described by the customer exists.
3. Find the malfunction by following the Symptom Chart. See: Symptom Related Diagnostic Procedures/Symptom Reference Chart
4. Verify malfunction is eliminated.
