Lancer Evolution L4-2.0L DOHC Turbo (2003)
Wheel Hub: Service and Repair
Disassembly and Assembly
DISASSEMBLY AND REASSEMBLY
DISASSEMBLY SERVICE POINTS
<<A>> FRONT WHEEL HUB ASSEMBLY REMOVAL
1. If the front wheel hub is seized, remove the knuckle together with front wheel hub and fix them with a vise.
2. Use special tools MB990244 (MB990241), MB991354 and MB990211 to pull out the front wheel hub from the knuckle.
INSPECTION
WHEEL BEARING ROTATION STARTING TORQUE AND AXIAL PLAYCHECK
Required Special Tools:
^
MB990998, MB991017: Front Hub Remover and Installer
^
MB990326: Preload Socket
^
MB990685: Torque Wrench
1. Tighten special tools MB991000 (MB990998) and MB991017 to the specified torque.
Tightening torque: 226 ± 19 Nm (167 ± 21 ft. lbs.)
2. Hold the front wheel hub assembly in a vice with a wooden block.
3. Rotate the hub in order to seat the bearing.
