Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
WARNING:
-
The SRS components and seat belt with pre-tensioner should not be subjected to heat, so remove the SRS-ECU, driver's and front
passenger's air bag modules, clock spring, knee air bag module, side-air bag modules, Curtain air bag modules, front and side impact
sensor and seat belt pre-tensioner before drying or baking the vehicle after painting.
-
SRS-ECU, air bag module, clock spring, impact sensor: 93 °C (200 °F) or more
-
Seat belt with pre-tensioner 90 °C (194 °F) or more
-
After servicing the SRS system, check the warning light operation to make sure that the system functions properly.
-
Make certain that the ignition switch is in the "LOCK"(OFF) position when the scan tool is connected or disconnected.