Lancer Evolution L4-2.0L Turbo (4B11T/C) (2010)
/Page-603190.png)
3. Measure the resistance between joint connector (CAN1) terminal 16 and body ground.
OK: 1 kohms or more
Q: Do all the resistances measure 1 kohms or more?
YES (vehicles without satellite radio) : Go to Step 12.
YES (vehicles with satellite radio) : Go to Step 11.
NO : Go to Step 56.
STEP 11. Check the wiring harness between joint connector (CAN1) C-105 and satellite radio tuner connector C-18 for a short to ground.
Measure the resistance at joint connector (CAN1) C-105.
1. Disconnect joint connector (CAN1), and measure the resistance at the wiring harness side of joint connector (CAN1).
2. Measure the resistance between joint connector (CAN1) terminal 2 and body ground.
OK: 1 kohms or more
3. Measure the resistance between joint connector (CAN1) terminal 13 and body ground.
OK: 1 kohms or more
Q: Do all the resistances measure 1 kohms or more?
YES : Go to Step 12.
